How to Install a Ghost Immobiliser
Ghost immobilisers are an effective deterrent for car thieves. By using this device in conjunction with other security systems and remaining vigilant, you can create an effective defense against modern, tech-savvy thieves.
A ghost immobiliser will protect your car from hotwiring and relay car thefts by requiring you enter an identification number to start the car. It works by using buttons on your steering wheel or the centre console, which makes it unnoticeable to criminals.
Identifying the Wires
It is crucial to safeguard your vehicle as more vehicles are being stolen without owners' keys. While thieves might be able to copy your key fob, or even steal the car by hacking its system Ghost immobilisers provide an additional layer of security by blocking all signals from the key fob and making it impossible to start your vehicle without entering a pin code.
You can install the ghost immobiliser your own, but it is recommended to have a professional handle the job. A skilled professional will know where to install the unit, and how to properly connect it to the vehicle's wiring. Installation can be complicated and it's crucial that all connections are done correctly to avoid damage or malfunctions.
To get the most effective results, you should be in a well-lit space and wear the appropriate safety equipment. Also, you should read the user's manual and familiarize yourself with the wiring system. This will help you identify the wires that are required for the installation and ensure that you have the correct tools and parts.
After the wiring is connected, you are able to reconnect the battery and test the system to see if it is functioning properly. It is also important to ensure that the battery terminals are secure to prevent electrical problems. You should also mark the CAN L and CAN H wires with labels or tape to be able to keep track of them during the installation process.
If you want to allow someone else to drive your vehicle for a short period of time for a valet parking or when your vehicle is in for maintenance, the Ghost Immobiliser can be set to Transport Mode. This lets you input the code through a service button located on the steering wheel, centre console, or door panels, and then it will enter PIN code change mode.
Some thieves attempt to evade an immobiliser that is ghostly by using jamming or spoofing devices to block or send fake signals to the system. This can be prevented by investing in anti-jamming technology and regularly monitoring your Ghost immobiliser to detect signs that it has been altered with.
Disconnecting the Battery
The ghost immobiliser, a modern security device, was designed to stop car theft. It utilizes cutting-edge technology to monitor the engine and disable it when the correct PIN is entered. This prevents the vehicle from being stolen by thieves. The system is highly efficient and discreet. It does not have visible indicators to deter criminals. You may have to take away your unit for maintenance, upgrades, or when you decide to sell your vehicle.
This procedure requires special tools and knowledge because you'll be working with wires and bypassing certain factory parts. Moreover, it is essential to follow the step-bystep instructions that are provided by the manufacturer of the ghost immobiliser. You should also seek advice from a professional mechanic or auto electrician especially if you do not have any experience working on vehicles.
It is crucial to examine your battery's condition after disconnecting the wires. Make sure it is clean and free of any corrosion, and that the connections are secure. If necessary, think about replacing the battery to ensure that it is strong enough to handle the electrical demands of an aftermarket security system.
After you have disconnected the wiring you can then remove the ghost immobiliser. Strippers or wire cutters are a good way to disconnect the wires. Be careful not to harm them or their terminals. Be sure to label each wire so that you can reconnect them properly in the future. If the wires are soldered, use an instrument that can withstand heat to break the connection. It is also important to shield the wires by using insulation tape or heat shrink tubing to stop them from short circuiting.
Reconnect the wires with the 12V constant power source. If required, use a fuse tap to make sure that the connections are protected by fuse. Connect the grounding wire to a solid grounding on the vehicle's chassis.
After reconnecting the wires, restart your vehicle and enter the PIN. Then, try starting the engine once more. If the engine doesn't start, then you have successfully removed the ghost immobiliser.
Making Connections
Ghost immobilisers are an affordable way to improve the security and safety of your vehicle. It works by connecting to the CAN bus system in your vehicle, capturing signals, and preventing the vehicle from starting until the proper PIN code has been entered. TheKeyLab is nearly impossible to circumvent. It's a great choice for drivers who want extra peace of mind and security. It can help lower your insurance premiums when utilized in conjunction with the Thatcham Approved Tracking System.
It is essential to obtain and study the wiring diagram of your vehicle model before you begin the installation. The diagram will act as a roadmap for locating the wires required to make precise connections. Making use of the correct wiring connectors or soldering techniques will ensure that the connection is strong and secure.
The wires that connect the Ghost immobiliser to the CAN bus system need to be identified and connected correctly. It is recommended to use small pieces of tape or labels to mark the CAN H and L wires, as this will avoid confusion during the installation process. These wires are located in different locations on every vehicle. It is important to reference the wiring diagram or online resources in order to identify them.
After the correct cables have been connected, power can be restored to the Ghost immobiliser. It is a great idea to test the immobiliser. Start the engine, but do not enter the code. This will verify that the immobiliser was installed correctly and functions as intended. It is recommended to test your immobiliser frequently, as this will assist in identifying any issues or problems early on.
The ghost immobiliser can be installed quickly and without modifying your vehicle's wiring. It is a fantastic option for those looking to add more security to their vehicle, as it works with a Thatcham approved tracker or alarm that will notify you via your phone or tablet if the vehicle is compromised.
Mounting the Unit
The Ghost immobiliser can be used as an effective deterrent for car thieves especially when it is paired with the use of a GPS tracking device. The device uses buttons on the center console, doors and the steering wheel to create a unique sequence you are able to recognize. This prevents your vehicle from getting started. The device is also tamper proof and weatherproof. It comes with a 3-year warranty and is endorsed by a variety of insurance companies.
During the process of installation it is essential to follow the instructions carefully. While some people are comfortable handling the job by themselves, it's recommended to seek out a professional you are uncertain. A multimeter and a wire stripper are essential tools to identify the wires and making precise connections. It's also a good idea to purchase some insulation and electrical tape for protecting the connections from damage. It's a great idea test your device after the installation is complete to be sure it works as intended.
Ghost immobilisers are an excellent option to protect your vehicle, especially in areas that have high rates of crime. It stops key cloning, ECU swapping, and other security threats, and it can be paired with an iPhone application to make it easy to manage and monitoring. It's a favorite option for car owners who want to safeguard their investment, and it's easy to install.
The Ghost II immobiliser is designed in a sleek, low-profile design that makes it virtually unnoticeable by thieves. It is connected to the CAN (Controller Area Network) system of your vehicle and prevents the engine from being started without a PIN code being entered. The PIN code is generated by pressing a set of buttons on your steering wheel, console or the door. It is also able to be changed at any point. The device is also tamperproof and includes an GPS tracker that can help police locate your vehicle in the event of a theft. It's a great choice to protect your car from thieves and is Thatcham approved.